Home OMAX Abrasive Waterjet Machine Range ProtoMAX Waterjet

ProtoMAX Compact Abrasive Waterjet

Enquire for price

SKU OPROTO

Category ProtoMAX Waterjet

Features

The ProtoMAX is a high-performance, light industrial waterjet capable of cutting virtually anything. The compact machine footprint combined with its comprehensive versatility makes the ProtoMAX an ideal abrasive waterjet for prototyping, educational applications, or as a complement to a larger machine shop. Using the same technology proven in the industrial environment, this small-footprint machine is all but ready to work right out of the box. The pump and cutting table are on casters for easy relocation. Work material is submerged under water for quiet cutting that won't disrupt your workspace.

OMAX Benefits

With the clamshell cover and submerged cutting, ProtoMAX is safe and quiet (approx. 76 db).
The same IntelliMAX software that runs our larger machine also runs the ProtoMAX making it a great learning tool.
IntelliMAX Proto comes with unlimited software seats.
Cuts virtually any material under 1 in. thick with a 12 in. by 12 in. cutting area.
Though compact, the ProtoMAX delivers 30,000 psi cutting power with a 5 HP (3.7kW) pump through a 0.2mm orifice at 0.95lpm (4.3 HP (3.2kW) at the nozzle)).
Like all OMAX abrasive waterjets, the ProtoMAX cuts with no heat-affected zone and no change to the material properties.
The waterjet plugs into a 240V AC single phase outlet and does not require hardwiring.
Comes with Spares and Consumables kit, Laptop Tray Kit, Water spray nozzle kit and a 20kg bucket of Barton 80 mesh garnet.

Additional Notes

All products meet rigorous international standards and requirements.
Accuracy Specifications are based on a water temperature of 22�C.
OMAX reserves the right to adjust specifications without notice.
Install according to local electrical code.

* Height (Lid Closed), Height Lid open 1,854mm.
**** Recommended maximum orifice size. Smaller orifice sizes have a corresponding lower flow rate.
***** pump included within enclosure under table

Specifications

Footprint* (L x W):	1,054 mm x 1,004 mm
Height **:	1,435 mm*
Weight (Tank Empty):	250 kg
Operating Weight:	340 kg
X-Y Cutting Envelope***:	304 mm x 304 mm
Z-Axis Travel***:	25 mm
Table Size (L x W):	368 mm x 393 mm
Material Support Slats:	51mm x 2.5mm Galvanised Steel
Max Supported Material Load:	244 kg/m2
Electrical Requirements:	230-240 VAC, Single Phase, 30A, 50/60Hz
Noise Level:	With lid closed and submerged cutting approx 76 dB.
Speed:	2,540 mm/min
Linear Positional Accuracy:	±0.1270 mm
Repeatability:	±0.0762 mm
Ballbar Circularity:	N/A